Agilent Technologies manual Starting The 5071A, Performing Basic Tasks, Powering Down the 5071A

Operating and Programming

Getting Started

Table 1-1 Rear-Panel Telecommunications Options Connections

Item

Number

1

2

3*

4*

5

6

7

Function

8 kHz Sync In

8 kHz Sync Out

Framed Output

Sync Out

Sync Out

Dc Power Fuse

Dc Power Input

Connector

Type

BNC (F)

BNC (F)

BNC (F)

BNC (F)

BNC (F)

Cartridge

Fuse

5-Screw Terminal Strip

Signal Characteristics

8 kHz, TTL level, into 50 Ω

8 kHz, TTL level, into 50 Ω

4.8V p-p max into 75 Ω (6V p-p into 100, or 120 Ω )

3 V p-p max into 75 Ω

TTL level, into 50 Ω

Fuses external dc power, 2.5 amp, 250-

volt rating (part number 2110-0952)

40 - 58 Vdc, 100 W Max, as labeled on rear panel (See bottom of page 1-10)

*Note: Item 3, Framed Output complies with ITU-T (formerly CCITT) G.703/6 (G.703/2

if option 104 or 105 is present) formatted per G.704.

Item 4, per G.703/10, 75 Ω (Additionally @ 1.544 MHz if option 104 or 105 present).

Starting The 5071A

Option 048: Bottom of page 1-6. * note is changed:

* 1 entry may be present: “Power source is BATT”

Performing Basic Tasks

Synchronizing to an External 1 PPS Reference

Any TCO Option: Observe the following changes to the external synchronization procedure:

References to 1 PPS outputs and Sync inputs are singular.

Reference to rear-panel 1 pps output(s) and Sync input do not apply.

Use of the front-panel ARM REAR menu option will always result in the display showing Sync timed out.

Powering Down the 5071A

Option 048: This procedure is deleted.

1-6