INSTALLATION

You are now ready to connect your various components to your receiver. Before beginning, turn off all components, including the AVR 154, and unplug their power cords. Don’t plug any of the power cords back in until you have finished making all of your connections.

Remember that your receiver generates heat while it is on. Select a location that leaves several inches of space on all sides of the receiver. Avoid completely enclosing the receiver inside an unventilated cabinet. It is preferable to place components on separate shelves rather than stacking them directly on top of the receiver. Some surface finishes are delicate. Try to select a location with a sturdy surface finish.

Step One – Connect the Speakers

If you have not yet done so, place your speakers in the listening room as described in the Speaker Placement section above.

Connect the center, front left, front right, surround left and surround right loudspeakers to the corresponding speaker terminals on the AVR 154. See Figure 16. Maintain the proper polarity by always connecting the positive and negative terminals on each speaker to the positive and negative terminals on the receiver. Use the Connection Color Guide on page 16 as a reference.

C

AVR 154

FR

FL

SR

SL

Figure 16 – Speaker Connections

Step Two – Connect the Subwoofer

Connect the Subwoofer Output on the AVR 154 to the line-level input on your subwoofer. See Figure 17. Consult the manufacturer’s guide for the subwoofer for additional information.

AVR 154

SUB

Figure 17 – Subwoofer Connection

20

Step Three – Connect the Antennas

Connect the FM and AM antennas to their terminals. See Figure 18.

AVR 154

AM

FM

Figure 18 – Antenna Connections

Step Four – Connect the Source Components

Use the Table A5 worksheet in the Appendix to note which connections you will use for each of your source devices.

A source is a device where the audio and video signals originate. Some sources, such as CD players, only offer audio, while sources used for watching movies or broadcast-television programming deliver a video signal as well.

Referring to the photograph of the AVR 154 remote control on page 13, there is a section of 12 buttons near the top of the remote desig- nated “Input Selectors”: DVD, AM/FM, CD, AUX, TAPE, VID1, VID2, VID3, HDMI1, HDMI2, HDMI3 and 6CH. Each of these buttons corresponds to a set of input connectors on the AVR. The set of connectors is referred to as a “source input”.

The goal of Step Four of the Installation is to match up each of your source devices, e.g., DVD player and cable television box, with the correct connectors on the AVR 154.

We recommend that you refer to Table A1 in the appendix when making these connections. Although you may connect a source to any source input with the matching types of connectors, by selecting the source input dedicated to the same type of component, you will be able to program the AVR’s universal remote to control it, simplifying operation.

The precise connections to be made depend on the capabilities of the source device and your video display (TV). Select the best audio and video connections for each source. The types of connections are listed in order of preference:

Audio Connections

Choose one digital audio connection: Optical or Coaxial

Optional, or where digital audio is not available: Analog audio for making recordings for personal use or as a backup. Analog audio is required for older analog sources that don’t have digital audio outputs,

such as cassette decks.

20

 

Page 20
Image 20
Harman-Kardon AVR 154 owner manual Installation, Step One Connect the Speakers, Step Two Connect the Subwoofer

AVR 154 specifications

The Harman-Kardon AVR 154 is a high-performance audio-video receiver designed for home theater enthusiasts seeking an immersive audio experience. Launched as part of Harman's esteemed line of receivers, the AVR 154 combines sophisticated technology with user-friendly features to create a versatile home entertainment solution.

One of the standout features of the AVR 154 is its multi-channel amplification, delivering a robust output of 50 watts per channel. This power allows for clean and dynamic sound, making it ideal for both movies and music. The AVR 154 supports a 5.1 surround sound configuration, providing an enveloping audio experience that brings films to life. With its ability to decode various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, it ensures that users enjoy high-quality audio without compromise.

Connectivity is a key aspect of the AVR 154, which offers multiple HDMI inputs, allowing for easy connection to various sources like Blu-ray players, gaming consoles, and streaming devices. With three HDMI inputs and one HDMI output, users have the flexibility to connect multiple devices while enabling audio and video pass-through. The receiver is also equipped with optical and coaxial digital inputs, ensuring compatibility with older audio sources.

Another important feature is the built-in FM/AM tuner, allowing users to access their favorite radio stations without the need for an external receiver. For those who prioritize convenience, the AVR 154 includes an intuitive on-screen display, guiding users through setup and configuration seamlessly. Additionally, the remote control provides easy access to all functions, making operation straightforward.

In terms of design, the Harman-Kardon AVR 154 boasts a sleek aesthetic with a brushed aluminum front panel. The distinctive look, combined with an easy-to-navigate interface, makes it an attractive addition to any home entertainment setup.

Overall, the Harman-Kardon AVR 154 stands out as a reliable and feature-rich AV receiver. With its impressive audio performance, extensive connectivity options, and user-friendly design, it caters to the needs of home theater enthusiasts who seek impactful sound and ultimate flexibility for their entertainment needs. Whether you’re enjoying a thrilling movie or listening to your favorite music, the AVR 154 promises to deliver an exceptional auditory experience.