
Advanced Installation Steps
b.During Windows NT installation install the following component:
—TCP/IP
c.After the NT installation is complete, install the following components and software:
—Microsoft Windows NT 4.0 Service Pack 5 or greater
—Microsoft Internet Explorer 4.00 or greater
5.If your browser uses a proxy server, then configure your browser using the procedure in Section B.6, “Browser Configuration During Initial Installation” on page
6.Install the SRCU31 software (run the SRCU31 setup) using the SRCU31
Note: You must have administrative level permissions to install SRCU31 software. This procedure assumes that the SRCU31 hardware and Windows NT server are installed and operational in your system.
a.Insert the SRCU31
b.Click on the Setup button. See Figure
Figure 2-20. Intel® Integrated RAID Software Installer Main Menu
Intel® Server RAID Controller |