Intel SRCU31 user manual 2.5.2.1In this Section, 2-21

Advanced Installation Steps

2.5Intel® Server RAID Controller U3-1 Setup and Installation

Note: The Intel Server RAID Controller U3-1 may not come with a memory module (DIMM). If the memory socket (indicated in Figure A-2) is not populated with a DIMM, install an approved DIMM into the memory socket as indicated in Figure A-2before proceeding. Refer to the approved memory list at: http://support.intel.com/support/motherboards/server/srcu31.

2.5.1Overview of Setup and Installation for Local Administration of NT Server

This chapter describes the installation procedures for SRCU31 on NT Server. These procedures include hardware installation, the creation and configuration of a RAID volume, OS installation and the installation of the SRCU31 software on servers requiring the ability to be locally managed. Figure 2-19illustrates the typical uses for this product.

Figure 2-19. Installing the Operating System on an SRCU31 RAID Volume, a Pass-through Disk or other Storage Device or Installing SRCU31 into a System with an Existing Operating System

Begin

Installation of

OS on a

SRCU31

Volume

Begin

Installation of

OS on a

Pass-Thru or

other Storage

Device

Begin

Installation of

SRCU31

into a System

with an

Existing OS

Gather Required

Software and

Hardware

Gather Required

Software and

Hardware

Gather Required

Hardware

and

Software

Install

Adapter Card

Install

Adapter Card

Back Up

Server

Create Bootable

RAID Volume

Using RCU

Create Pass-Thru Disk and Select it as Boot Volume Using RCU

Update the OS

Create OS

Installation

Driver Diskette

Create OS

Installation

Driver Diskette

Install

Adapter Card

Install OS on a RAID Volume

Install OS on a

Pass-Thru or other Storage Device

Run

SRCU31

Setup

Run

SRCU31

Setup

Run

SRCU31

Setup

2.5.2Setup and Installation for Local Administration of Microsoft Windows NT* Server

2.5.2.1In this Section

•RAID Requirements for Microsoft Windows NT Server 4.0

•Installing Microsoft Windows NT Server 4.0 on a Intel® Integrated RAID Volume

•Installing Microsoft Windows NT Server 4.0 on a Pass-through Disk or other Storage Device

Intel® Server RAID Controller U3-1 User’s Manual Rev 1.0 2-21