Intel SRCU31 C.2.3 Firmware Update Utility FUU Error Messages, C.2.2.3. Warning Messages

Error Messages Defined

C.2.2.3. Warning Messages

"WARNING 2301: This operation will update contents of RAID Adapter flash

memory with file: <filename>"

This warning message is displayed after the user successfully selects a filename for the Update operation. It warns the user that the FRU is about to program the flash memory on IOP hardware with the file selected. The user may choose to continue or escape the operation selected. If the user escapes the operation then no action is performed.

"WARNING 2302: File to be programmed is empty. If you CONTINUE the action, the flash memory will be erased and nothing will be programmed in flash memory. If you ESCAPE, no action will be performed."

This warning message is displayed when the user selects a file for the Update operation that is empty (zero bytes in size). It warns the user that if the operation continues, it will erase the flash memory on IOP hardware but will not program anything since the file to be programmed is empty. The user has two choices: Continue or Escape. If the user selects to escape the operation, no action is performed.

"WARNING 2303: File to be programmed is in HEX format. This format is not supported by this software. If you CONTINUE the file will be programmed in RAID Adapter flash memory as it is (without Hex to Binary conversion). If you ESCAPE, no action will be performed."

When a user tries to Update the flash memory on IOP hardware, the FRU checks for the contents of the file to be programmed. If at the end of file, the FRU finds the End Of File Hex File Format Record, it displays this message. It warns the user that the FRU only accepts binary file. It does not convert a hex format file to binary file. The user has two choices: Continue or Escape. If the user continues, then the file is programmed as it is in the flash memory of IOP hardware without any hex to binary conversion. If the user escapes the operation, then no action is performed.

C.2.3 Firmware Update Utility (FUU) Error Messages

C.2.3.1. Firmware Update Utility (FUU) Internal Errors (Error Code Range = 1500 to 1599)

For Internal Errors 1500-1599, contact your Server OEM for support.

These error messages are reported in the following format:

INTERNAL ERROR xxxx: Fatal internal error

The phrase ‘Internal Error xxxx’ is shown in blinking red. The xxxx is the internal error code number.

Internal Error Codes

1500 – Downloaded Firmware Error

1501 – Generic Internal Error

1502 – Cannot Allocate Operations List Buffer

1503 – Cannot Allocate Results List Buffer

C-4 Intel® Server RAID Controller U3-1 User’s Manual Rev 1.0