Intel SRCU31 Create a RAID 0 Volume, Three or More Scsi Disk RAID Configuration Selection

Advanced Installation Steps

Figure 2-2. Three or More SCSI Disk RAID Configuration Selection

Intel(R) Integrated RAID - RAID Configuration Utility Version 4.05

Copyright(c) Intel Corporation 1998-2000 All Rights Reserved

Please select from the following RAID Volume Creation options.

RAID VOLUME LEVEL:	RAID 0
	RAID	1
			<- Typical
	RAID	5

Arrow Keys to Highlight, ENTER to Select.

Esc for previous menu

2.3.3.2RAID Configuration Utility - All Disks Already in a RAID Volume

If you select the Create RAID Volume option when one or more RAID volumes already exist, then the “A RAID Volume already exists” screen appears. See Figure 2-3. While in RAID Configuration Utility you will be unable to create new RAID volumes without first deleting all existing RAID volume(s).

Note: The number of volumes you can create using RAID Configuration Utility is limited to one. However, you may select the size of this volume.

Figure 2-3. RAID Volume Already Exists

Intel(R) Integrated RAID - RAID Configuration Utility Version 4.05

Copyright(c) Intel Corporation 1998-2000 All Rights Reserved

A RAID Volume already exists.

Please use the Advanced RAID Configuration Utility to create additional RAID Volumes.

Arrow Keys to Highlight, ENTER to Select.

Esc for previous menu

2.3.3.3Create a RAID 0 Volume

A RAID 0 volume creation screen is shown in Figure 2-4.

2-6 Intel® Server RAID Controller U3-1 User’s Manual Rev 1.0