
Advanced Installation Steps
Note: SRCU31 will work in a 32bit slot, however, a 64bit, 33 MHz PCI slot is recommended. Consult the system guide for the target server board to determine an appropriate 64bit, 33 MHz PCI slot.
Note: Ensure that the ends of the SCSI bus are properly terminated. Consult the documentation for the drives or drive enclosure for termination details.
8.Intel Integrated RAID Software Installation
9.Create and configure a RAID volume using the RAID Configuration Utility. See “How to Invoke Advanced RCU” on page
10.Install the SRCU31 software (run the SRCU31 setup).
Note: You must have administrative level permissions to install SRCU31 software. This procedure assumes that the SRCU31 hardware and Windows NT server are installed and operational in your system.
a.Insert the SRCU31
b.Click on the Setup button. See Figure
The three components in the window in Figure
Note: The DMI and SNMP components are not selected by default. Refer to section “Intel® Integrated RAID Software Component Installation” on page
A progress bar appears that measures the progress of the SRCU31 setup. When this screen completes, you have completed the SRCU31 setup.
Note: Refer to section “Intel® Integrated RAID Software Component Installation” on page
11.See Chapter 4, Section 4.3, “Configuring RAID Volumes Using the Intel® Integrated RAID Storage Console” on page
Intel® Server RAID Controller |