
Advanced Installation Steps
2.5.8Setup and Installation for Novell NetWare*
2.5.8.1In this Section
•RAID Requirements for Novell NetWare
•Installing Novell NetWare on a RAID Volume
•Installing Novell NetWare on a
•Installing Intel Server RAID Controller
•Uninstalling Intel Server RAID Controller
2.5.8.2RAID Requirements for Novell NetWare
When installing the SRCU31 Kit for Novell NetWare, note the following system requirements.
RAID Hardware Requirements
•Server with
•One available PCI slot (64bit, 33MHz recommended)
•Monitor display resolution of 800 x 600 or higher (recommended)
•Intel® Server RAID Controller
•PCI 2.2 Compliant System BIOS
•Memory: 3.3v,
RAID Software Requirements
•SRCU31 CD-ROM
•Hard disk space: minimum 4 MB
•
•SRCU31 NetWare Installation Diskette (If you do not have an OS Installation Driver Diskette and you wish to create one, see the Chapter 3, “Exploring the Utilities”.)
•Novell NetWare 4.2 - use Support Pack 8a or higher†
•Novell NetWare 5.0 - use Support Pack 4 or higher†
†Not supplied with SRCU31
Have all required system hardware and software components available before proceeding with the setup and installation.
Warning: Do not install OSM(s) downloaded from OS vendor websites. The OSMs provided on the SRCU31
Intel® Server RAID Controller |