Advanced Installation Steps
Packages which have been previously installed will only be updated if the revision number of the currently installed package is older or newer.
11.After completing the installation of the components launch the application using the commands in Table
12.Reboot the system and create a RAID volume. See Section 2.2, RAID Configuration Utility.
13.Reboot the system into UnixWare and install the browser if necessary. The Netscape browser is provided in the SCO UnixWare
14.After completing the installation of the components launch the application using the commands in Table
Launching Storage Console
1.Log on to the server as root or equivalent. Launch Netscape, type http://localhost:360/ and hit Enter.
2.Click on the IOP # card that you want to configure; for example, IOP0, IOP1 etc.
3.Click on the RAID Storage Console link. The Storage Console appears.
Intel® Server RAID Controller |