14 www.SimplicityMfg.com | www.MasseyLawn.com | www.AGCOLawn.com | www.Snapper.com
Assembly
Figure 20. Turbo Belt Routing
A. Turbo Drive Belt
B. Mower Deck Drive Pulley
C. Belt Tension Lever
D. Idler Pulleys
E. Mower Deck Turbo Drive Pulley
F. Turbo Drive Pulley
Figure 21. Remove Right Side Pushnut and Roller
A. Roller, Hollow
B. Pushnut, 5/8
B
E
C
F
D
A
BA
Figure 22. Install Right Side Pushnut and Roller
A. Roller, Solid
B. Pushnut, 5/8
BA
Install Turbo, Belt and Roller
1. Place the mower deck in the highest cut position.
2. Slide the pivot pin (A, Figure 19) into pivot bracket
(F).
3. Raise the deflector (B).
4. Rotate the turbo (C) and “latch” the slot in the
turbo housing over and onto the anchor bracket
(D). Slot in mounting latch (A, gure 17 & 18) to be
around outside nut. If not - reposition mounting
latch on turbo. Tighten the wingnut (E) and
cupwasher to secure turbo (C).
5. Attach the mower drive pulley to the mower deck
drive pulley (B, Figure 20).
6. Pull back (away from deck) on belt tension lever
(C).
7. Install the turbo drive belt on pulleys as shown and
release the belt tension lever (C).
8. Models With Rollers - Remove and discard the
pushnut (B, Figure 21) and roller (A) from the right
side of mower deck as shown.
9. Models With Rollers - Install the roller (A, Figure
22) and 5/8 pushnut (B) from the right side of
mower deck as shown.
Figure 19. Install Turbo Blower
A. Pivot Pin
B. Deflector
C. Turbo
D. Anchor Bracket
E. Wingnut
F. Pivot Bracket
D
C
E
B
A
F