Troubleshooting
If, after reading the following instructions, you still have problems relating to the
operation of this System, please call our Customer Support Hotline:
Problem | Possible Remedies |
|
|
No sound in Main Room | • Make sure the muting is not engaged. |
| • If playing a CD, make sure that a disc is loaded. |
| • Try pressing the Source Select button for the desired source |
| again, to reset the correct inputs and power up the correct |
| components. |
|
|
No sound in additional rooms | • Make sure the muting is not engaged. |
| • Make sure the power button on all the amps at the bottom |
| of the rack are pushed in and are lit. |
|
|
No picture and no sound | • Try another TV station. It may be a station issue. |
| • If playing a DVD, make sure that a disc is loaded. |
| • Try pressing the Source Select button for the desired source |
| again, to reset the correct inputs and power up the correct |
| components. |
|
|
Wireless remote does not | • Replace the remote control batteries. |
operate | • Confirm a direct line of sight from the remote control to the |
| system rack and/or infrared repeater “eye.” |
|
|
Playback stops suddenly | • Confirm that no one else is operating the system from |
| another room. |
|
|
Channel changes suddenly | • Confirm that no one else is operating the system from |
| another room. |
|
|
Source changes suddenly | • Confirm that no one else is operating the system from |
| another room. |
|
|
TV channel instead of a VHS | • Confirm that a VHS cassette is loaded into the VCR. |
tape. |
|
|
|
Aspect ratio of the TV picture is | • Cycle through the options on the TV Wide button of the |
wrong. | infrared remote control. |
|
|
19