Ricoh Aficio AP2700 operating instructions G Set paper guide lock to the “locked” position

Loading Paper and Other Media

❒When you set thick paper in tray 2, do not stack paper above the lower limit mark (A) of tray 2.

ZAEY052E

Note

❒Shuffle the paper before setting in the tray.

❒Load paper face up onto the tray.

FAlign the side guide for the load- ed paper size (B) by opening the release lever of the side guide (A).

ZAEY031E

GSet paper guide lock to the “locked” position.

ZAEY032E

HAlign the rear guide for the load- ed paper size slightly by pushing the releasing lever of the rear guide.

ZAEY033E

4

I Adjust the paper size dial for loaded paper size.

ZAEY050E

Important

❒Confirm that the setting of the paper size dial matches the pa- per size and feed direction of the paper in the tray. Otherwise, the paper misfeed or unexpect- ed printing result might occur.

❒Confirm that the paper size dial matches the actual paper size loaded in the tray. If the actual

paper size is not shown on the dial, set the dial to "p" and specify the paper size using the operation panel. For more infor- mation on specifying the paper size, see P.27 “Paper Types and Sizes”.

JSlide the tray into the printer un- til it stops.

43