Ricoh Aficio AP2700 Other Printing Problems, ⇒ P.89 Using the Operation Panel, Friction Pad

Models: Aficio AP2700

1 138
Download 138 pages 15.32 Kb
Page 84
Image 84

Troubleshooting

Other Printing Problems

 

 

Status

Possible Causes, Descriptions, and Solutions

 

 

 

 

 

 

The area on the page that

Adjust the image density correctly.

 

 

should be white or free of

⇒ P.89 “Using the Operation Panel”

 

 

toner is a hazy gray.

 

 

 

 

 

 

 

The edge of the paper is hazy

If paper is curled, correct it.

 

 

gray.

Replace the corrected paper.

 

 

 

 

 

 

 

 

 

The back of the printed out-

Check if the size specified with the dial matches that

 

 

put is hazy gray.

specified with the operation panel. If not, specify the

 

 

 

correct size that matches the size and feed direction of

 

 

 

the paper loaded in the tray.

 

 

 

If you print something after printing on the paper

 

 

 

whose size is smaller than the actual document size,

 

 

 

the back of the next output might be hazy gray.

5

 

 

 

 

⇒ P.41 “Loading Paper and Other Media”

 

 

 

 

 

 

 

 

 

Image quality varies when

Set to Thick paper mode by switching the lever inside

 

 

printing on thick paper or on

of the tray 2 or specifying for Bypass Tray Type 270 to

 

 

OHP transparencies.

use the printer driver.

 

 

 

⇒ P.89 “Using the Operation Panel”

 

 

 

 

 

 

Print image is too light.

Adjust image density to darker.

 

 

 

⇒ P.89 “Using the Operation Panel”

 

 

 

 

 

 

 

If the Toner Saving mode is specified using the opera-

 

 

 

tion panel, the whole image gets lighter. See the driv-

 

 

 

er's online help file.

 

 

 

 

 

 

Print image is too dark.

Adjust image density to lighter.

 

 

 

⇒ P.89 “Using the Operation Panel”

 

 

 

 

 

 

Some parts of the print image

Due to a sudden change in temperature, condensation

 

 

are not clear.

might appear inside the machine, and reduce the print

 

 

 

quality. If this occurs when you move the printer from

 

 

 

a cold room to a warmer room, don't use the printer

 

 

 

until it gets used to the temperature.

 

 

 

 

 

 

Multiple pages are fed

Clean the friction pad, if it is dirty. ⇒ P.85 “Cleaning the

 

 

through the printer at once.

Friction Pad”

 

 

 

 

 

 

 

Clean the pad inside of the tray, if it is dirty. ⇒ P.86

 

 

 

“Cleaning the Pad inside of the tray”

 

 

 

 

 

 

Image is printed on the re-

Set the paper upside down.

 

 

verse side of the paper.

 

 

 

 

 

66

Page 84
Image 84
Ricoh Aficio AP2700 operating instructions Other Printing Problems, ⇒ P.89 Using the Operation Panel, Friction Pad