Chapter 9 Troubleshooting
This chapter describes problems you may encounter while using DC260. If you have questions, please refer to related chapters and follow all the suggested solutions. If the problem still occurred, please contact our distributors or service center.
No. | Issues |
| Solutions |
1 | Boot without | Make sure you have plugged in the power cord. | |
| power |
|
|
2 | No image output | 1. | Check the power. |
| from the DC260 | 2. | Check the connection, Refer to DC260 User |
|
|
| Manual Chapter 4 Installation and |
|
|
| Connections 4.3 Connecting Devices |
|
| 3. | Check the [Source], refer to DC260 User Manual |
|
|
| Chapter 7 Descriptions of major functions 7.1 |
|
|
| I would like to switch image sources |
|
| 4. | Check the settings for the source of the |
|
|
| projector. For the appropriate input selection of |
|
|
| the projector, refer to the projectors user manual |
|
| 5. | Check if DIP Switch is properly set. Refer to |
|
|
| DC260 User Manual Chapter 5 DIP Switch |
|
|
| Settings for related settings. |
3Unable to focus Probably the document is too close. Press [zoom
4 | The image is | Check the Auto Image setting of your |
| incomplete | projector. Please refer to the user manual of the |
|
| projector. |
5 | Forget the | Please contact your distributor or the service center. |
| password for |
|
| turning on |
|
6Visual Presenter Visual Presenter V2, Ladibug™ and other
V2, Ladibug™ or applications cannot be executed simultaneously.
other application | Only one application can be executed at a |
cannot be | time. Please close the currently running applications |
executed | and then execute the application to be used. |
simultaneously. |
|
English - 47
