5-14
Cisco MWR 1900 Mobile Wireless Edge Router Software Configuration Guide
78-13983-04
Chapter 5 Command Reference
redundancy
redundancy
To access the command mode that allows you to configure aspects of redundancy, use the redundancy
command.
redundancy
Syntax Description This command has no parameters, it invokes the redundancy mode.
Defaults There are no default settings or behaviors.
Command Modes Global configuration
Command History
Examples The following example enables redundancy mode.
redundancy
Related Commands
Release Modification
12.2(8)MC2 This command was introduced.
Command Description
mode y-cable Invoked y-cable mode.
standalone Indicates whether the MWR 1900 router is being used as a standalone
device and manually sets the relays.
standby use-interface Designates a loopback interface as a health or revertive interface.