Cisco Systems 78-13983-04 manual Mode y-cable, Standalone, Standby use-interface, Redundancy

Chapter 5 Command Reference

mode y-cable

mode y-cable

To access the command mode that allows you to manually control the relays on the VWIC card, use the mode y-cablecommand.

	mode y-cable
Syntax Description	This command has no parameters, it invokes the y-cable mode.
Defaults	There are no default settings or behaviors.
Command Modes	Redundancy configuration
Command History	Release	Modification
	12.2(8)MC2	This command was introduced.
Examples	The following example enables y-cable mode.
	mode y-cable
Related Commands	Command	Description
	standalone	Indicates whether the MWR 1900 router is being used as a standalone
		device and manually sets the relays.
	standby use-interface	Designates a loopback interface as a health or revertive interface.
	redundancy	Invoked redundancy mode.

Cisco MWR 1900 Mobile Wireless Edge Router Software Configuration Guide

78-13983-04 5-7