Cisco MWR 1900 Mobile Wireless Edge Router Software Configuration Guide
78-13983-04
Chapter4 Configuring with the Command-Line I nterface
Verifying the Configuration
standby use-interface Loopback102 revertive
standby use-interface Multilink2 backhaul
!
controller T1 0/0
framing esf
cablelength short 133ft
clock source internal
linecode b8zs
channel-group 0 timeslots 1-1 speed 64
channel-group 1 timeslots 2-24 speed 64
!
controller T1 0/1
framing esf
clock source internal
linecode b8zs
cablelength short 133ft
!
!
class-map match-all class1_fch
match ip dscp cs5
class-map match-all class2_sch
match ip dscp cs4
class-map match-any class3_paging_ospf
match ip dscp cs3
match access-group 101
!
policy-map llq-policy
class class1_fch
priority percent 68
class class2_sch
bandwidth percent 20
queue-limit 128
class class3_paging_ospf
bandwidth percent 2
queue-limit 128
class class-default
queue-limit 512
!
ip dhcp excluded-address 192.168.146.1 192.168.146.3
ip dhcp ping packets 0
!
ip dhcp pool pbts
network 192.168.146.0 255.255.255.0
bootfile CENOMIbts.img
next-server OMCR-IPaddr
option 43 ascii "Logical-IPaddr CENOMI-IPaddr another-IPaddr SpanMapping"
default-router 192.168.146.3
dns-server OMCR-IPaddr
lease 0 0 1
!
ip routing
ip subnet-zero
ip classless
ip multicast-routing
ip tftp source-interface Loopback 0
cdp run
!
! Setup sys logging to OMCIP-CW2000
!
logging on
logging buffered 4
logging cw4mw
logging trap 5
logging source-interface Loopback0