Fujitsu MHE2043AT, MHF2043AT, MHF2021AT System Configuration, ATA interface, 2 1 drive connection

Device Configuration

2.2 System Configuration

2.2.1 ATA interface

Figures 2.3 and 2.4 show the ATA interface system configuration. The drive has a 44-pin PC AT interface connector and supports the PIO transfer at 16.6 MB/s (ATA-3, Mode 4), the DMA transfer at 16.6 MB/s (ATA-3, Multiword mode 2) and also the U-DMA at 33.3 MB/s (ATA-3, Mode 2).

2.2.2 1 drive connection

MHE2064AT

MHE2043AT

MHC2032AT

MHF2043AT

MHC2040AT

MHF2021AT

Figure 2.3 1 drive system configuration

2.2.3 2 drives connection

	MHE2064AT
(Host adaptor)	MHE2043C 32AT
	MHF2043ATC2040AT
	MHF2021AT
	MHE2064AT
	MHE2043AT
	MHC2032AT
	MHF2043AT
	MHC2040AT
	MHF2021AT

Note:

When the drive that is not conformed to ATA is connected to the disk drive above configuration, the operation is not guaranteed.

Figure 2.4 2 drives configuration

2-4 C141-E057-02EN