Fujitsu MHE2064AT, MHF2043AT, MHE2043AT, MHF2021AT Write circuit, Write precompensation algorithm

Theory of Device Operation

signal (WUS) when a write error occurs due to head short-circuit or head disconnection.

The Pre AMP sets the write current and bias current which flows through MR devices.

4.6.2 Write circuit

The write data is output from the hard disk controller (HDC) with the NRZ data format, and sent to the encoder circuit in the RDC. The NRZ write data is converted from 16-bit data to 17-bit data by the encoder circuit then sent to the PreAMP, and the data is written onto the media.

(1) 16/17 GCR

The disk drive converts data using the 16/17 (0, 12, 8) group coded recording (GCR) algorithm. This code follows a format in which 0 to 12 “0”s are inserted while the code bit is “1” and 0 to 8 “0”s are inserted while the 0DD/EVEN bit is “1”.

(2) Write precompensation

Write precompensation compensates, during a write process, for write non- leneartiry generated at reading. Table 4.2 shows the write precompensation algorithm.

Table 4.2 Write precompensation algorithm

Bits	Compensation
111001	–7
111010	–6
:
111111	–1
000000	±0
000001	+1
:
010000	+16
:
100000	+32

4-10 C141-E057-01EN