CONFIGURING A SINGLE RAID LEVEL 5 ARRAY
To configure a single RAID Level 5 array:
1.Power up the DX9200HDDI. For information about powering up the DX9200HDDI, refer to the DX9200HDDI Series IDE Video Storage Unit installation/operation manual.
2.On the DX9200HDDI control panel, do the following:
a.Press the CTRL button. The TO CONTROLLER PRESS ANY KEY message is displayed on the LCD screen.
b.Press !. The Enter Password prompt is displayed.
c.Press ! to enter 00000000 (default password).
d.Press !. The Main menu is displayed.
Figure 13. Accessing the Main Menu
3.To configure a single array, do the following:
a.Press !"and scroll to 2 RAID Params.
b.Press !. The 2 RAID Params menu is displayed.
c.Press !"to scroll to 21 Array 1.
d.Press !. The 21 Array 1 menu is displayed.
e.Press !"and scroll to 211 Re-Conf RAID.
f.Press !. The 211 Re-Conf RAID menu is displayed.
g.Press !"to scroll to YES.
C2635M (1/07) | 17 |
