2Press <Ctrl><i> when you are prompted to enter the Intel RAID Option ROM utility.

3Press the up- and down-arrow keys to highlight Create RAID Volume, and press <Enter>.

4Enter a RAID volume name or accept the default, and press <Enter>.

5Press the up- and down-arrow keys to select RAID0(Stripe), and press <Enter>.

6If more than two hard drives are available, press the up- and down-arrow keys and spacebar to select the two or three drives that you want to use to make up your configuration, and then press <Enter>.

NOTE: Select the strip size closest to the size of the average file that you want to store on the RAID volume. If you do not know the average file size, choose 128 KB as your strip size.

7Press the up- and down-arrow keys to change the strip size and press <Enter>.

8Select the desired capacity for the volume and press <Enter>. The default value is the maximum available size.

9Press <Enter> to create the volume.

10Press <y> to confirm that you want to create the RAID volume.

11Confirm that the correct volume configuration is displayed on the main Intel RAID Option ROM utility screen.

12Press the up- and down-arrow keys to select Exit and press <Enter>.

13Install the operating system (see "Restoring Your Operating System" on page 136).

Creating a RAID Level 1 Configuration

1Set your computer to RAID-enabled mode (see "Setting Your Computer to RAID-Enabled Mode" on page 48).

2Press <Ctrl><i> when you are prompted to enter the Intel RAID Option ROM utility.

3Use the up- and down-arrow keys to highlight Create RAID Volume and press <Enter>.

4Enter a RAID volume name or accept the default and press <Enter>.

About RAID Configurations

49

Page 49
Image 49
Dell T3400 manual About RAID Configurations