Dell T3400 manual Adding and Replacing Parts

NOTICE: Do not route card cables over or behind the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause damage to the equipment.

9Connect any cables that should be attached to the card.

See the documentation for the card for information about the card’s cable connections.

10Ensure that the tops of all cards and filler brackets are flush with the alignment bar and that the notch in the top of the card or filler bracket fits around the alignment guide.

11Reinstall the card retention cover, if removed.

12Close the card retention cover by snapping it into place to secure the card(s).

182

Adding and Replacing Parts