1

2

3

1

release tab

2

card retention cover

3

card retention door

 

 

6Remove the filler bracket to create a card-slot opening, if necessary.

7Prepare the card for installation.

See the documentation that came with the card for information on configuring the card, making internal connections, or otherwise customizing it for your computer.

CAUTION: Some network adapters automatically start the computer when they are connected to a network. To guard against electrical shock, be sure to unplug your computer from its electrical outlet before installing any cards.

8Place the card in the connector and press down firmly.

Ensure that the card is fully seated in the slot, the top of the card is flush with the alignment bar, and the notch in the top of the card fits around the alignment guide.

Adding and Replacing Parts

181

Page 181
Image 181
Dell T3400 manual 181, Card retention door