Dell T3400 manual Removing an Optical Drive Tower Computer, 231

12Connect your computer and devices to their electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software required for drive operation.

13Enter System Setup (see "Entering System Setup" on page 81) and select the appropriate Diskette Drive (for a floppy drive) or USB (for a Media Card Reader) option.

14Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on page 107).

Optical Drive

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.

NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer’s electronic components. You can do so by touching an unpainted metal surface on the computer.

Removing an Optical Drive (Tower Computer)

1Follow the procedures in "Before You Begin" on page 143.

2Remove the computer cover (see "Removing the Computer Cover" on page 145).

3Remove the front panel (see "Removing the Front Panel" on page 154).

4Disconnect the power cable from the back of the drive and the CD/DVD drive cable from the back of the drive and the system board.

Adding and Replacing Parts

231