Hot swappable user battery replacement

Space saving, ultra-compact housing with support for wall-mount, desktop or floor placement

Specifications

OUTPUT

Output Volt Amp Capacity (VA)

Output Watt Capacity (watts)

Nominal Output Voltage(s) Supported

Frequency compatibility

Output voltage regulation (line mode)

Output voltage regulation (Battery mode)

Built-in UPS output receptacles

Surge suppression only outlets

Output AC waveform (AC mode)

Output AC waveform (battery mode)

INPUT

700

350

115V; 120V

60Hz

+8%, -21%

115V (+/- 5%)

8 5-15R outlet(s)

4 UPS outlets, 4 surge-only outlets

Sine wave

PWM sine wave

Rated input current (at maximum load)

Nominal Input Voltage(s) Supported

UPS input connection type

UPS Input cord length (ft.)

UPS Input cord length (m)

Recommended Electrical Service

BATTERY

12A

120V AC

5-15P

6

1.8

15A 120V

Full load runtime (minutes)

Half load runtime (minutes)

DC system voltage (VDC)

Battery recharge rate (included batteries)

Battery Access

Battery replacement description

2.3min. (350w)

8.6min. (175w)

12

12 hours (10% to 90%)

Battery access door

Hot-swappable, user replaceable batteries

VOLTAGE REGULATION

Page 2
Image 2
Tripp Lite AVR700U instruction manual Specifications, Output, Input, Battery, Voltage Regulation

AVR700U specifications

The Tripp Lite AVR700U is a versatile and reliable automatic voltage regulator designed to protect sensitive electronic equipment from fluctuations in voltage levels. This unit is particularly suitable for home and office environments where voltage irregularities can lead to malfunctions or damage to devices like computers, audio/video equipment, and networking gear.

One of the standout features of the AVR700U is its ability to provide automatic voltage regulation through advanced technology. This unit stabilizes incoming voltage fluctuations by stepping down overvoltages and boosting low voltages to keep the output within a safe range. It ensures that connected devices receive consistent power, reducing the risk of damage and extending their lifespan.

The AVR700U has a robust design equipped with a total of seven outlets, including five battery-supported outlets and two surge-only outlets. This configuration allows users to connect multiple devices without the need for additional power strips. The unit also features a built-in 700VA/450W capacity that can support a range of devices, ensuring sufficient power supply during surges or outages.

Another key characteristic of the AVR700U is its compact form factor, which allows it to fit conveniently into any workspace without occupying too much space. The integrated LED indicators provide real-time feedback about the unit's operational status and voltage levels, allowing users to monitor performance easily.

In addition to voltage regulation, the unit comes equipped with surge protection to guard against sudden spikes in electrical current that can be caused by lightning strikes or electrical faults. The AVR700U features a high energy absorption rating, which adds an additional layer of protection for connected equipment.

The device is also designed with user convenience in mind; it's easy to install and requires no additional software or setup. Its lightweight nature ensures that it can be easily transported or relocated as needed.

Overall, the Tripp Lite AVR700U is an essential tool for anyone looking to safeguard their valuable electronic devices against the perils of voltage fluctuations and surges. With its combination of automatic voltage regulation, surge protection, and user-friendly design, it stands out as a practical solution for maintaining a stable power supply.