Dell T3400 manual If you are removing a SAS drive, Power cable Serial ATA cable Sata connector

1

2

3

4

1	power cable	2	serial ATA cable
3	SATA connector	4	optional third serial ATA/SAS
			hard drive

7If you are removing a SAS drive:

a Disconnect the power cable form the SAS connector. b Disconnect the SAS connector from the hard drive.

c Disconnect the SAS connector from the SAS controller card.

8Slide the sliding-plate lever to the right to release the shoulder screw and slide the drive out of the lower 3.5-inch drive bay.

9Set the drive aside in a secure location.

198

Adding and Replacing Parts