Dell T3400 manual To install a SAS hard drive

1

2

3

4

			5
			6
1	serial ATA cable	2	SATA0 connector
3	SATA1 connector	4	power cable
5	secondary hard drive bay	6	hard drive in primary hard drive
			bay

To install a SAS hard drive:

aConnect the power cable to the SAS connector.

bConnect the SAS connector to the hard drive.

cConnect the other end of the SAS cable to the SAS controller card.

9Ensure that all connectors are properly cabled and firmly seated.

10Replace the computer cover (see "Replacing the Computer Cover" on page 262).

NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.

196

Adding and Replacing Parts