Dell T3400 manual Cards, 162

NOTICE: To avoid damage to the memory module, press the module straight down into the connector while applying equal force to each end of the module.

5Insert the module into the connector until the module snaps into position.

If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.

6Replace the computer cover (see "Replacing the Computer Cover" on page 262).

NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.

7Connect your computer and devices to electrical outlets, and then turn them on.

8Enter System Setup (see "Entering System Setup" on page 81) and verify the value for System Memory.

The amount of System Memory reflects the newly installed memory.

NOTE: If the amount of memory is incorrect, check the installed memory modules to ensure that they are seated properly in their connectors.

9Press <Esc> to exit System Setup.

Cards

NOTE: Check the documentation for cards to ensure that you can accommodate them in your configuration. Some cards that require more physical space and power (such as PCI Express graphics cards) may restrict the use of other cards.

162

Adding and Replacing Parts