Dell T3400 manual Optional serial ATA hard drive in lower 5.25-inch drive bay

6If you are removing a SATA drive, disconnect the serial ATA cable from the back of the hard drive and from the SATA connector on the system board.

1

2

3

4

5

1	power cable	2	power supply
3	serial ATA cable	4	SATA connector

5optional serial ATA hard drive in lower 5.25-inch drive bay

7If you are removing a SAS drive:

a Disconnect the power cable form the SAS connector. b Disconnect the SAS connector from the hard drive.

c Disconnect the SAS connector from the SAS controller card.

8Slide the sliding-plate lever to the right to release the shoulder screw and slide the drive out of the lower 5.25-inch drive bay.

204

Adding and Replacing Parts