1

2

1

fan release lever

2

fan

7Lift the fan release lever and slide the fan toward the back of the computer to release it from the bottom and remove it from the computer.

8Disconnect the control-panel cable from the I/O panel connector by pulling with the cable loop.

9Remove the front panel (see "Removing the Front Panel" on page 154).

10Remove the drive panel (see "Drive Panel" on page 212).

11If an optional sound card is installed, disconnect the cable from the edge of the I/O panel.

12If an optional IEEE 1394 cable is installed in the front port, remove the cable from the front of the computer by following the instructions that came with the connector.

13Remove the mounting screw from the I/O panel.

14Remove the I/O panel from the computer.

254

Adding and Replacing Parts

Page 254
Image 254
Dell T3400 manual Fan release lever