Dell T3400 Memory Info, Channel mode dual or single, and type by Dimm slot, Location, PCI Info

Memory Info	Identifies the amount of memory installed, the memory speed,
	channel mode (dual or single), and type by DIMM slot
	location.
PCI Info	Identifies installed expansion cards by type and slot location.
Date/Time	Displays current date and time settings.
Boot Sequence	Specifies the sequence of devices from which the computer
	attempts to boot when trying to find an operating system (see
	"Boot Sequence" on page 92).
	NOTE: If you insert a boot device and restart the computer, the
	option to boot to that device appears in the boot sequence. To
	boot from a USB memory device, for example, select the USB
	device and move it so that it becomes the first device in the boot
	sequence.
Drives
Diskette Drive	Enables and disables the floppy drive(s) attached to the
(Internal default)	computer and sets read permissions for the drive(s).
	• Off — All floppy drives are disabled.
	• USB — USB floppy drives are enabled.
	• Internal — The integrated floppy drive is enabled.
	• Read Only — The integrated floppy drive is enabled with
	read-only access.
	NOTE: Operating systems with USB support will recognize USB
	floppy drives regardless of this setting.
SATA Drives 0	Enables or disables drives attached to the SATA connectors on
through 5	the system board.
(On default)	• Off — The drive attached to the interface is disabled.
	• On — The drive attached to the interface is enabled.

SATA Operation

(RAID Autodetect/

AHCI default)

Specifies the operating mode of the integrated hard drive controller.

•RAID Autodetect/AHCI — RAID if signed drives, otherwise AHCI.

•RAID Autodetect/ATA — RAID if signed drives, otherwise ATA.

•RAID On — SATA is configured for RAID on every boot.

System Setup

83