SMART Reporting

(Off default)

Specifies whether hard drive errors for internal drives are reported during system startup.

Off — Errors are not reported.

On — Errors are reported.

Onboard Devices

Integrated NIC

Enables or disables the integrated network interface controller

(On default)

(NIC).

 

 

Off — The integrated NIC is disabled.

 

On — The integrated NIC is enabled.

 

On w/PXE — The integrated NIC is on (with PXE enabled).

 

On w/RPL — The integrated NIC is on (with RPL enabled).

 

NOTE: PXE or RPL is required only if you are booting to an

 

operating system located on another computer. If a boot routine is

 

not available from the remote system, the computer attempts to

 

boot from the next device listed in the boot sequence.

 

 

Integrated Audio

Enables or disables the integrated audio controller.

(Auto default)

Off — Integrated audio is disabled.

 

Auto — Use the add-in Audio controller.

 

On — Integrated audio is enabled.

 

 

USB Controller

Enables or disables the internal USB controller.

(On default)

Off — The USB controller is disabled.

 

On — The USB controller is enabled.

 

No Boot — The USB controller is enabled; however, the BIOS

 

will not recognize USB storage devices.

 

NOTE: Operating systems with USB support will recognize USB

 

storage devices regardless of the No Boot setting.

 

 

Rear Quad USB

Enables or disables the rear quad USB ports.

(On default)

Off — The USB group is disabled.

 

On — The USB group is enabled.

 

 

Rear Dual USB

Enables or disables the rear dual USB ports.

(On default)

Off — The USB group is disabled.

 

On — The USB group is enabled.

 

 

84

System Setup

Page 84
Image 84
Dell T3400 manual Boot from the next device listed in the boot sequence, Will not recognize USB storage devices