Patton electronic 1082/I

Note

When setting the 1082 for SNMP Management, the DTE rate

switches (S1-1,S1-2, and S2-1) must be also set to the ON posi-

tion. Therefore, to set a 1082 unit SNMP Mangagement mode, the

following switches have to be at the ON position, S1-1, S1-2, S2-1.

Switches S1-1 and S1-2: Data Rate

Use switches S1-1 and S1-2 to conﬁgure the asynchronous or synchro-

nous data rate of the Model 1082/I and Model 1082/144/I. Each setting

represents one synchronous data rate and one asynchronous data rate.

Note

The Model 1082/I can also operate at the 19.2 kbps synchro-

nous rate, and the Model 1092/144/I can also operate at the 144

kbps synchronous rate. To operate at these rates, set Switches

S1-1 and S1-2 both to the OFF position and Switch S2-1 to the

ON position (see “Conﬁguring DIP switch “S2”” on page 152 for

a description of Switch S2-1).

If the S2-1 switch is positioned in the OFF position, the 128 kbps

sync data rate/0–38.4 kbps async data rate option is selected.

Switch S1-3 and S1-4: Must be set to the ON position (Reserved).

Switch S1-5: Asynchronous/Sync Operation

Use Switch S1-5 to conﬁgure the Model 1082 for async/sync operation.

Switch S1-5 must be set in the Off position. There is no other valid set-

ting.

S1-1 S1-2 Sync Data Rate Async. Data Rate

On On 32 kbps Reserved

Off On 56 kbps Reserved

On Off 64 kbps Reserved

Off Off 128 kbps (see note) 0–38.4 kbps

Off Off 144 kbps or 19.2 kbps (see note) Reserved

S1-3 Setting S1-4 Setting

On Reserved On Reser ved

S1-5 Setting

Off Async/Sync