Patton electronic 1082/I

2.0 GENERAL INFORMATION

Thank you for your purchase of this

Patton Electronics

product. This

product has been thoroughly inspected and tested and is warranted for

One Year parts and labor. If any questions or problems arise during

installation or use of this product, please do not hesitate to contact

Patton Electronics Technical Support

(301) 975-1007

2.1 FEATURES

• Provides MAC Level Data Link (Layer 2) connection between two

peered 10Base-T Ethernet LANs

• Operates transparently to higher level protocols such as TCP/IP, DEC-

net, NETBIOS and IPX

• PPP (Point to Point Protocol, RFC 1661) with Bridge Control Protocol

(RFC 1638)

• Automatically learns, loads and removes MAC addresses

• Point-to-point distances up to 5 miles (all data rates) on 24 AWG

twisted pair

• HTTP/SNMP Manageable as CP (Customer Premises) Unit with

1092ARC CO (Central Ofﬁce) Rack Card and 1001MC management card

• Internal or receive recovered clocking between units

• LED indicators for 10Base-T Link, DSL Link, Status, No Signal, Error

and Test Mode

• Remote digital loopback, local line loopback diagnostic modes

• Synchronous data rates: 19.2, 32, 56, 64, 128, and 144 kbps

Note

144 kbps data rate is only available on the Model 1082/144/I.

19.2 kbps rate is available on all Model 1082 series modems

except

for the 1082/144/I.

• Full duplex operation over a single twisted pair (2-wires)

• Multi-Rate Symmetric DSL

• Compatible with the popular Patton Model 1092A

• Universal power supply (90–260VAC) or DC power supply (-48VDC)

• Small, Convienent Desktop Unit

• CE Marked