Dell T3400 manual Adding and Replacing Parts

13Enter System Setup (see "Entering System Setup" on page 81) and select the appropriate Diskette Drive option (for a floppy drive) or a USB option (for a Media Card Reader).

14Verify that your computer works correctly by running the Dell Diagnostics (see "Dell Diagnostics" on page 107).

Removing a Floppy Drive or a Media Card Reader (Desktop Computer)

1Follow the procedures in "Before You Begin" on page 143.

2Remove the computer cover (see "Removing the Computer Cover" on page 145).

3Remove the front panel (see "Removing the Front Panel" on page 154).

4Disconnect the power and data cables from the back of the floppy drive or Media Card Reader.

5Disconnect the other end of the floppy-drive cable from the system board connector labeled "FLOPPY" (for a floppy drive) or "USB1" (for a Media Card Reader). To locate system board connectors, see "System Board Components" on page 148.

226

Adding and Replacing Parts