IBM 6 MPLS manual Router Attributes, Traffic Mapping Configuration

Specialized Models User Guide 6 MPLS Model User Guide

Figure 6-5 Mapping EXP Bits to Drop Precedence and PHB

Router Attributes

Some of the important MPLS Parameters attributes set on routers are described below.

Traffic Mapping Configuration

This attribute specifies bindings between FECs and LSPs. Each row of the Traffic Mapping Configuration table specifies a distinct traffic engineering (TE) binding. Each TE binding specifies the FEC, traffic trunk, and LSP that is applied to the label of the incoming packet.

Only previously defined values appear in the attribute pull-down lists. If no values appear in the attribute pull-down lists, verify that you have defined the FECs and traffic trunks in the MPLS Configuration object, and that the LSPs appear in the network path browser.

SPM-6-6 Modeler/Release 10.0