IBM 6 MPLS manual Using the LSP Browser

Specialized Models User Guide 6 MPLS Model User Guide

LSP Browser

After you create the LSPs in the network, you may want to edit or view the default settings. You do this in the LSP browser, which you can access from the Protocols > MPLS > Browse/Edit LSP Information... menu item. The browser enables you to

•Set the hop type of LERs

•Set the start and end times for the LSP

•Set threshold values for bandwidth, delay, and hop counts in the LSP

•Hide some or all of the LSPs from view in the Project Editor workspace

•Export LSP configuration details to a file

Figure 6-13 Using the LSP Browser

This column indicates if the attribute values shown are from the GUI or the LSP specification file.

These attributes set the LSP’s Path Details and Setup, TE, and Recovery Parameters attributes.

Clicking here toggles the display settings—the workspace is immediately refreshed to show or hide the LSPs.

Clicking OK saves the current settings in the LSP specification file or creates this file if one does not yet exist.

Modeler/Release 10.0 SPM-6-11