Agilent Technologies J3919A, J3972A manual Number to display the OC-3 ATM port’s configuration

Local Terminal Configuration

Using a Local Terminal

Cell	Cell Sychronization is configured as HEC (Header Error
Sychronization	Control).
Cell Scrambling	Press 2 and then set Cell Scrambling to On or Off.

3.Press S to save the configuration changes and return to the probe’s Main Menu. If you want to cancel your current changes and return to the probe’s Main Menu, press 0.

Use the following procedure to configure items in the Modify/View Interface Values menu for the second port on the OC-3 ATM interface:

1.Press 3 to access the Modify/View interface values menu item. The Modify/View Interface Values menu for port 2 is displayed, as shown in Figure 2-8.

Modify/View Interface Values Menu - Firmware Rev

Interface Type		ATM
1.	Port	3.1/ATM
2.	Port Type	Monitor-only
3.	Network Type	UNI
S. Save changes and exit
0.	Cancel changes and exit

Figure 2-8: Modify/View Interface Values Menu (OC-3 ATM, Port 2)

2.Select each field requiring configuration (one at a time) by pressing its corresponding number and then entering the values that are appropriate for your network.

Port	Press 1 and then enter the desired OC-3 ATM interface’s port
	number to display the OC-3 ATM port’s configuration
	parameters along with their current settings. Refer to
	“Display Interface Summary” on page 36 for information on
	port types and port numbers for the installed interfaces. You

34