Local Terminal Configuration
Probe Configuration Using a Local Terminal
Probe Configuration Using a Local Terminal
Some initial configuration information must be entered into the probe before it can communicate over the LAN telemetry network interface or serial port. The ATM interface must be configurated before monitoring can occur.
The initial configuration for the Ethernet LAN Telemetry network
IP Address
Default Gateway IP Address (if required)
zSubnet Mask (if required) Autodiscovery Echo Interval
If you are configuring the optional
zRing Speed Ring Number
The probe uses the following configuration parameters to display time and date information in the user interface only. The probe uses a separate internal clock to
Date
zTime Time Zone
The initial configuration for communication over the serial port consists of the following parameters:
Serial Port IP Address
Serial Port Subnet Mask (if required)
Serial Port Speed
zSerial Port Mode
Modem Control String (if required)
17
