| Local Terminal Configuration |
| Using a Local Terminal |
Serial port speed | Press 5 and then enter a serial port speed (300 to 38,400 |
| baud) for the probe’s SNMP connection. The default is |
| 9600 baud. This speed is used only for |
| access to the probe using SNMP. It does not affect the |
| serial connection for the local terminal, which is fixed at |
| 9600 baud. |
| Make sure that the serial port speed is set to less than or |
| equal to the maximum speed of the modem to be used. |
Serial port mode | Press 6 and then select the serial port mode by pressing 1 |
| for direct connection (the default) or 2 for modem |
| connection. |
Serial port hardware | Press 7 and then select hardware flow control Off by |
flow control | pressing 1 or hardware flow control On (the default) by |
| pressing 2. |
Modem Init String | Press 8 to enter the modem initialization string. Only the |
| first 20 characters of the 256 character maximum will be |
| displayed in the Modify/View Serial Port Settings menu. |
| The default is ^s^M^d1^sATEOQOV1X4 S0=1 |
| S2=43^M. |
Modem Hangup | Press 9 to enter the modem |
String | first 20 characters of the 256 character maximum will be |
| displayed in the Modify/View Serial Port Settings menu. |
| The default is ^d2^s+++^d2^sATHO^M^d2. |
Modem Connect | Press 10 to enter the modem connect responses. Only |
Responses | the first 20 characters of the 256 character maximum will |
| be displayed in the Modify/View Serial Port Settings |
| menu. The default is /CONNECT/300/CONNECT |
| 1200/1200/CONNECT 2400/2400/CONNECT |
| 4800/4800/CONNECT 9600/9600/CONNECT |
| 14400/14400/CONNECT 19200/19200/ |
| CONNECT 38400/38400/. |
39
