Agilent Technologies J3919A, J3972A manual Probe Memory Allocation

Specifications

	Probe Memory Allocation
	The memory allocated to each parameter depends on how much memory is
	installed in the probe. The memory parameter values relate to the various items in
	the RMON or the Agilent private MIBs. These parameters were valid at the time
	of publication.
	Table B-2 on page 131 shows the memory allocated to each parameter for the
	available probe memory configurations. The memory allocation shown for each
	memory amount column assumes that all of the available memory within the
	probe is allocated to the identified parameter.
NOTE	The parameter values shown in Table B-2 on page 131 are approximate and
	subject to change without notice.
	Network Statistics and Trace buffers (packet capture buffers) are allocated
	dynamically from the same memory allocation. The values shown for Network
	Statistics assume that no Trace buffers are configured. If Trace buffers are
	configured, the number of Network Statistics are reduced.

130