Agilent Technologies J3919A, J3972A manual Bootp Server Setup on a PC

Bootp Server Configuration

Bootp Server Setup on a PC

Where:

-a IP address is required and specifies the IP address of the PC where you are running bootpd.

-sspecifies that you are running bootpd as a standalone executable (not as a TSR). You may want to use the -soption if you do not need the Bootp daemon to continually service bootp requests. This is preferable, since the Bootpd TSR may consume a large amount of memory (depending on the size of your bootptab file).

Upon startup, Bootpd reads the bootptab file and then listens for bootp request packets from the network. Bootpd re-reads the bootptab file when it receives a bootp request packet and detects that the file has been updated. If hosts are added, deleted, or modified, their entries in Bootpd’s internal database are also updated when the bootptab file is re-read. All Bootp status messages are logged to the BOOTPD.LOG file.

You can now attach the power cord to the probe and to a power source (either 100- 120/VAC or 220-240/VAC). The probe does not have a power switch but becomes operational when power is attached. When powered on and when its IP address is

0.0.0.0(the default), the probe automatically broadcasts Bootp requests that trigger the Bootp server to provide its configuration parameters.

86