Agilent Technologies J3972A, J3919A manual Token-Ring Telemetry Interface Configuration

	Local Terminal Configuration
	Using a Local Terminal
Full/Half	Press 8 and select the line type as Half-Duplex or Full-
Duplex	Duplex. This parameter is not available unless the 10MB/s or
	100MB/s option was selected for the Link Speed parameter.

Parameters do not take effect until you select the Save Changes and Exit menu item.

3.Press S to save the configuration changes and return to the probe’s Main Menu. If you want to cancel your current changes and return to the probe’s Main Menu, press 0.

Token-Ring Telemetry Interface Configuration

If the optional Token-Ring telemetry interface is not installed, skip this section and continue with “OC-3 ATM Interface Configuration” on page 33. Otherwise, use the following procedure to configure items in the Modify/View Interface Values menu for the Token-Ring Telemetry Interface:

1.Press 3 to access the Modify/View interface values menu item. The Modify/View Interface Values menu is displayed, as shown in Figure 2-6 on page 30.

29