Introduction
Installation and Configuration Overview
Installation and Configuration Overview
To quickly install and configure your probe, it is important for you to understand the available configuration and installation options. Configuration consists of setting the probe parameters (IP address, for example). Installation consists of physically installing the probe and connecting it to the network.
You will reference different chapters of this Installation/User’s Guide depending on which of the following installation and configuration options you select:
z“Local Terminal Configuration and Installation” below “Installation and Bootp Server Configuration” below
Local Terminal Configuration and Installation
This method of installation and configuration requires that you configure the probe first and then install the probe. These procedures are detailed in Chapter 2 “Local Terminal Configuration” and Chapter 3 “Installation”.
Installation and Bootp Server Configuration
This method of installation and configuration requires that you install the probe first and then configure the probe. These procedures are detailed in Chapter 3 “Installation” and Chapter 4 “Bootp Server Configuration”.
4
