| Local Terminal Configuration |
| Using a Local Terminal |
Date | Press 2 and enter the day of the week and then the date in |
| month/day/year format (mm/dd/yy, through 1999 or |
| mm/dd/yyyy, starting 2000). |
Time | Press 3 and enter the time of day in hours, minutes, seconds |
| (hh:mm:ss) format. |
Time Zone | Press 4 and enter your time zone in one to 15 characters |
| (optional). |
| The Time Zone characters are stored for your convenience |
| and are used to |
| Recommended practice is to use the format of Time Zone, |
| hours from Greenwich mean time, and then Daylight Saving |
| Time, such as PST8PDT for Pacific Standard Time (the |
| default). The probe does not automatically update the Time |
| field when your local time changes from standard time to |
| daylight savings and back. |
The values you enter for date and time take effect as soon as you enter them. All other parameters do not take effect until you select the Save Changes and Exit menu item.
3.Press S to save the configuration changes and return to the probe’s Main Menu. If you want to cancel your current changes and return to the probe’s Main Menu, press 0.
NOTE | The other Main Menu items are explained in other chapters of this manual. The |
| TFTP Download new firmware and XMODEM Download new firmware |
| menu item is described in Chapter 6 “Download New Firmware”. The Warm |
| start and Exit and Cold start and Exit menu items are explained in Chapter 5 |
| “Probe Operation”. |
|
|
23
