Agilent Technologies J3919A, J3972A manual Network Compatibility, Network Connection

Specifications

Specifications

This appendix lists the specifications for the Agilent J3919A and J3972A OC-3 ATMProbes.

Network Compatibility

Agilent J3919A and J3972A

Base

Hardware: 10Base-T/100Base-TX RJ-45 and AUI, Telemetry Interface.

Option 125 1 6-pin DIN connector is used for an Optical Bypass Switch (optional)

Option 210 1 OC-3 Single Mode Interface

Option 211 1 OC-3 Single Mode Interface and 1 Token-Ring Telemetry Interface

Option 212 1 OC-3 Multimode Interface

Option 213 1 OC-3 Multimode Interface and 1 Token-Ring Telemetry Interface

The probe can use either a Fast Ethernet network connection, an optional Token-Ring network connection, or the SLIP link to communicate with a management station.

Network Connection

The network connection is made using the standard AUI for 10 MB/s Ethernet. 10Base-T or 100Base-TX half-duplex connections are made using the standard RJ-45 connector.

The OC-3 ATM circuit connection is made using two fiber SC connectors that support 155.52 Mbps ATM traffic. Optional transceivers support multimode and single-mode.

The 6-pin DIN connector is used for an Optical Bypass Switch (optional).

126