Jensen JiMS-182 owner manual Specifications, General

Symptom	Possible Cause	Solution
Radio
Noise or sound distorted	Station is not tuned properly	Fine-tune the AM or FM
on AM or FM	for AM or FM.	broadcast station.
broadcasting.	FM: The broadcast station	Find another station or
	signal is weak	relocate the unit until the
		best reception is obtained.
	AM: The location of the built-in	Remove your iPod and
	antenna is not correct.	rotate the unit until the best
		reception is obtained.
AM or FM no sound	Unit is not in RADIO function	Press the FUNC. Button
	mode	repeatedly to select the
		RADIO mode.
	Volume is at minimum	Increase Volume level
iPod
iPod will not play	Unit is not in iPod mode	Press the FUNC. Button to
		select iPod mode.
	iPod is not inserted properly	Re-insert iPod again
Alarm
No Alarm	Alarm is not activated	Check that Alarm indicator
		“ ” or “ ” , “ ” or “ ”
		“ ” or “ ” appears in the
		Display.
	Incorrect Alarm time	Make sure AM or PM is set
		correctly.
Abnormal Operation
Clock, iPod, Radio or	Internal micro controller needs	Remove all the batteries
AUX IN not functioning	to be reset	(including backup battery
		CR2025), disconnect the AC
		adaptor and wait a few
		seconds for the built-in
		micro controller to reset.
Abnormal or no display	Internal micro controller needs	Remove all the batteries
	to be reset	(including backup battery
		CR2025), disconnect the AC
		adaptor and wait a few
		seconds for the built-in
		micro controller to reset.
	SPECIFICATIONS
GENERAL
Power source ---------------------------------	DC 6V 2000mA AC adapter (Included)
	DC 6V, “AA” size (UM-3) battery x 4 (Not
	12