Agilent Technologies J3919A, J3972A manual Modify/View Interface Values Menu Token-Ring

Local Terminal Configuration

Using a Local Terminal

Modify/View Interface Values Menu - Firmware Rev

MAC Address		00 00 C6 XX XX XX
Interface Type		Token Ring
1.	Port	3
2.	Port Type	Telemetry
3.	IP address	0.0.0.0
4.	Default gateway IP address	0.0.0.0
5.	Subnet mask	0.0.0.0
6.	Token-Ring Speed (Mbps)	16
7.	Ring Number	-1
S. Save changes and exit
0.	Cancel changes and exit

Figure 2-6: Modify/View Interface Values Menu (Token-Ring)

2.Select each field requiring configuration (one at a time) by pressing its corresponding number and then entering the values that are appropriate for your network.

Port	Press 1 and then press the number of the Token-Ring port to
	display the Token-Ring port’s configuration parameters along
	with their current settings. The port number for the
	Token-Ring interface (if installed) depends on where it is
	installed. Refer to “Display Interface Summary” on page 36
	for information on port types and port numbers for the
	installed interfaces. You can then view or configure the
	Token-Ring port’s configuration parameters.

30