SMC Networks 16 10BASE-T, 100BASE-TX manual Lacp Configuration

Port Configuration 3

Web – Click Port, LACP, Configuration. Select any of the switch ports from the scroll-down port list and click Add. After you have completed adding ports to the member list, click Apply.

Figure 3-42. LACP Configuration

CLI – The following example enables LACP for ports 1 to 6. Just connect these ports to LACP-enabled trunk ports on another switch to form a trunk.

Console(config)#interface	ethernet 1/1	4-104
Console(config-if)#lacp		4-121
Console(config-if)#exit
.
.
.	ethernet 1/6
Console(config)#interface
Console(config-if)#lacp
Console(config-if)#end
Console#show interfaces status port-channel 1		4-111
Information of Trunk 2
Basic information:	100TX
Port type:
Mac address:	22-22-22-22-22-2d
Configuration:
Name:	Up
Port admin:
Speed-duplex:	Auto
Capabilities:	10half, 10full, 100half, 100full
Flow control status:	Disabled
Port security:	Disabled
Max MAC count:	0
Current status:	Lacp
Created by:
Link status:	Up
Port operation status:	Up
Operation speed-duplex:	100full
Flow control type:	None

Member Ports: Eth1/1, Eth1/2, Eth1/3, Eth1/4, Eth1/5, Eth1/6, Console#

3-69