Agilent Technologies In-Depth Command Instructions for the 6023A Power Supply Series

Command

DLY x

DLY xS

DLY xMS

Table 3-7 GP-IB Commands (continued)
*Range or **Response		Page
To Query	Description
*0--31.999 s	Any of these commands is used to program the	57
	delay time after a new output voltage or current is
	implemented, or RST or OUT ON command is
*0--31999 ms	received. During delay power supply disables CV,
	CC, and OR conditions from being labeled as
	faults, and disables foldback protection.

DLY?

OUT OFF

OUT 0

OUT ON

OUT 1

OUT?

FOLD OFF,

FOLD 0

FOLD CV

FOLD 1

FOLD CC

FOLD 2

FOLD?

RST

HOLD OFF

HOLD 0

HOLD ON HOLD 1

**DLY xx.xxx

**OUT 0 or **OUT 1

**FOLD 0 or **FOLD 1 or **FOLD 2

Used to read delay time setting.	57
.Enables or disables power supply output. Power	58
supply remains able to implement commands
even while output is disabled
Initial Condition: OUT ON
Used to read OUTPUT ON/OFF setting	58
Enables or disables foldback protection which	58
will disable power supply output if power supply
switches to whichever mode, CV or CC, is
defined as the fold (error) condition. Foldback
protection is inhibited during DELAY period.
Initial Condition: FOLD OFF.
	58
Used to read FOLDBACK setting.
Used to reset power supply if output is disabled	59
by overvoltage, remote inhibit, or foldback
protection circuits. Power supply resets to present
voltage and current settings (values can be
changed while unit is disabled).
Determine if certain newly received commands	59
are implemented by power supply upon receipt or
are held for later
implementation while power supply
continues to operate with previously received
values. HOLD ON can be used to synchronize
power supply changes with actions taken by other
devices on the GP-IB. See TRG command. Initial
Condition: HOLD OFF

HOLD?

**HOLD 0 or **HOLD 1

Used to read HOLD setting

59

Operating Instructions 51